Most sublimation blanks press at 180°C. What changes from one blank to the next is the time and the pressure: a polyester t-shirt needs 120 seconds at normal pressure, an 11oz mug needs 180 seconds at medium pressure, and a photo slate needs 300 to 360 seconds at light pressure. The chart below lists the recommended settings for every blank we sell that has published press settings, grouped by product type.
Use these settings as your starting point, then run a test piece on your own press before a full batch. Presses vary, and the sections after the chart explain what to change if a result looks faded, scorched or blurred.
Sublimation temperature and time chart
Times are in seconds. Pressure is given as it appears on each product page. Where several products share the same settings, they are listed together.
Mugs
| Blank | Temperature | Time | Pressure |
|---|---|---|---|
| 11oz Orca Mugs, AAA Grade (white) | 180°C | 180s | Medium |
| 11oz Inner and Handle Coloured Mugs (pink, light blue, navy blue, black, grey, baby blue, green, red, maroon, purple, orange, yellow) | 180°C | 180s | Medium |
| 11oz Polymer Unbreakable Mug | 160°C | 120s | Medium |
Tumblers and water bottles
| Blank | Temperature | Time | Pressure |
|---|---|---|---|
| 20oz Tumbler (600ml) | 180°C | 30s | Medium |
| 20oz Tumbler With Handle | 180°C | 30s | Medium |
| 40oz Tumbler (white) | 180°C | 160s | Medium |
| Stainless Steel Water Bottles (pink, blue, yellow, double insulated white) | 180°C | 30s | High |
| Explorer Water Bottles, 600ml (black, blue) | 180°C | 60s | Medium |
Christmas blanks
| Blank | Temperature | Time | Pressure |
|---|---|---|---|
| Christmas Baubles, 8cm (red, silver) | 180°C | 60s | Medium |
| Ceramic Ornaments, 3" with gold string (round, star, heart) | 190°C | 120s | Medium |
| Christmas Stockings (small kids, large, luxury 290gsm) | 190°C | 50 to 60s | Medium to firm |
| Linen Santa Sack, large (50 x 68cm) | 185°C | 60s | Medium |
Clothing and textiles
| Blank | Temperature | Time | Pressure |
|---|---|---|---|
| 100% Polyester T-Shirts, adult and kids (white, grey) | 180°C | 120s | Normal |
| 100% Polyester Hoodies, adult and kids (white, grey) | 180°C | 120s | Normal |
| 100% Polyester Crop Top, adult (white) | 180°C | 120s | Normal |
| Polyester Aprons (adult, kids) | 180°C | 120s | Medium |
| Soft Polyester Tote Bags (white or natural, large or small) | 180°C | 60s | Medium |
Bags, cases and tech accessories
| Blank | Temperature | Time | Pressure |
|---|---|---|---|
| Leather Flip Phone Cases (all iPhone and Galaxy models) | 180°C | 80s | Normal |
| iPad Cases (iPad Pro 9.7", iPad Pro 12.9", iPad Mini 4) | 180°C | 80s | Medium |
| Phone Stand (black) | 180°C | 80s | Medium |
| Neoprene Laptop Sleeves (16 inch, 18 inch) | 180°C | 200s | High |
| Large Sublimation Backpack | 180°C | 200s | High |
| Pencil Case (black) | 180°C | 120s | Medium |
| Lunch Bag (black) | 180°C | 120s | Medium |
| Passport Holder (white) | 180°C | 60s | Medium |
| Spiral Notepads with plastic cover (A4, A5, A6) | 180°C | 60s | Medium |
Jewellery and keyrings
| Blank | Temperature | Time | Pressure |
|---|---|---|---|
| Oblong Metal Keyrings (silver, rose gold, gold) | 180°C | 80s | Medium |
| Rectangle Keyring, double sided | 180°C | 80s | Medium |
| Circle Necklace and Heart Necklace | 180°C | 80s | Medium |
Hard blanks: coasters, slate, crystal and glass
| Blank | Temperature | Time | Pressure |
|---|---|---|---|
| Unisub Square Hardboard Coaster, 9 x 9cm raw back | 180°C | 110s | Medium |
| MDF Cork Back Coaster | 180°C | 80s | Medium |
| Crystal Blocks (small 8 x 6 x 1.5cm, large 15 x 20 x 1.9cm) | 180°C | 160s | Medium |
| Square Photo Rock Slate Coaster, matte | 180°C | 360s | Light |
| Square Photo Rock Slate Coaster, gloss | 180°C | 300s | Light |
| Photo Rock Slate, 15 x 20cm rectangle, glossy | 180°C | 360s | Light, face down |
| Photo Rock Slate, 20 x 20cm square, glossy | 180°C | 300s | Light |
| Glass Cutting Boards (large and small chinchilla, large and small smooth, 12" round smooth) | 180°C | 180s | Medium |
You can browse each group in our sublimation mugs, Christmas, sublimation clothing and other sublimation blanks collections. Each product page shows the same settings.
If the print looks faded
A pale or washed-out print usually means not enough ink has turned to gas and moved into the blank. Check these in order:
- Time. Add 10 to 15 seconds and press a test piece. This is the smallest change and the easiest to reverse.
- Pressure. On a flat press, light pressure can leave pale patches where the paper did not touch the surface. Increase it one step.
- Actual temperature. A press that shows 180°C may be running cooler. Check the platen with an infrared thermometer.
- The print itself. Sublimation ink looks dull on paper before pressing, which is normal. If the pressed result is still pale, check that you printed on the coated side of the paper at high quality.
Our guide to prints coming out too dark or too light covers the printer-side causes in more detail.
If the print looks scorched or yellowed
Brown or yellow tinting on white areas, or a shiny square mark on fabric, points to too much heat or too much time. Reduce the time first, by 10 to 15 seconds, before you lower the temperature. On garments, a square outline around the design is usually a press mark from the platen edge rather than scorching; our guide on avoiding press marks on fabric explains how to prevent it. Hoodies and other thick items are more prone to marks because of seams, zips and pockets under the platen.
If the print looks ghosted or blurred
Ghosting is a faint second image offset from the main one. It happens when the paper moves during pressing or as the press opens, and the hot ink transfers a second time. Fix it by holding the paper in place with high temperature heat tape on every edge, and by lifting the paper off in one clean movement once the press opens. On mugs and tumblers, wrap the paper tightly so there are no gaps between the paper and the surface. See our guide to using heat-resistant tape for placement tips.
Allowing for differences between presses
The settings in the chart are a starting point, not a guarantee, because no two presses heat in exactly the same way. Things to check on your own press:

- Display versus platen temperature. Measure the platen surface with an infrared thermometer after preheating. If it reads 5 to 10 degrees off the display, adjust your set temperature to compensate.
- Even heating. Measure the centre and each corner. Cooler corners show up as faded edges on large prints. Our guide on heat presses that are not heating evenly covers this.
- Pressure scale. Light, medium and high are relative. On a manual clamshell press, medium pressure usually means the handle closes with firm effort but no strain.
- Mug and tumbler presses. Element size and fit vary, so a tumbler that sits loosely in the element will need longer than one held tightly.
Write down the settings that work for each blank on your press, and use them every time. Our guide to heat press machines for sublimation compares the main types.
Polyester fabric versus coated hard blanks
Sublimation ink bonds with polyester. On fabric, the polyester is the fibre itself, which is why our t-shirts, hoodies, aprons and tote bags are 100% polyester and press at 180°C for 60 to 120 seconds. Cotton has no polyester to bond with, so the ink washes out.

Hard blanks such as mugs, slate, crystal, glass, metal keyrings and coasters are made from materials that cannot take sublimation ink on their own. They carry a polyester-based coating on the print surface, and that coating is what receives the ink. Coated blanks usually need more time than fabric, because the heat has to pass through a solid material that soaks up heat, such as ceramic, stone or glass. That is why photo slate needs 300 to 360 seconds and crystal blocks 160 seconds, while a t-shirt needs 120.
Two practical points follow from this. Coated surfaces can scratch, so handle them by the edges and keep them clean before pressing. Hard blanks also stay hot for a long time after pressing, so use heat-resistant gloves and let them cool on a heat-safe surface.
FAQs
What temperature should I use for sublimation mugs?
Our 11oz white Orca mugs and 11oz inner and handle coloured mugs are pressed at 180°C for 180 seconds at medium pressure. The 11oz Polymer Unbreakable Mug is different: it is pressed at 160°C for 120 seconds at medium pressure.
Is 200°C too hot for sublimation?
For the blanks in this chart, yes. The highest setting we list is 190°C, for ceramic ornaments and Christmas stockings. Pressing hotter than the recommended temperature increases the risk of scorching and yellowing, especially on white areas.
Should I change the time or the temperature first?
Change the time first, in steps of 10 to 15 seconds. Temperature changes have a bigger effect and are harder to judge. Only adjust the temperature once you have confirmed with a thermometer that your press is reading accurately.
Why does my print look dull before pressing?
Sublimation ink always looks muted on paper. The full colour only appears once the ink is heated and moves into the polyester or coating. Judge colour on the pressed item, not on the printed sheet.
Why do Christmas stockings have a time range instead of a single time?
The stockings are listed at 190°C for 50 to 60 seconds at medium to firm pressure. Start at 50 seconds on a test piece and move towards 60 if the print looks pale.